软管泵匠心工艺

软管泵产品在国内外多种工业领域均有应用，市场需求巨大，工业不断研究出新的产品机型，具有特殊结构的软管。软管泵的核心部件就是橡胶软管，软管的破裂和损伤通常表现在软管外层磨损破裂或外层与帘线加固层撕裂脱开，终无法输送介质。软管的内径以及转子的转速，都是由泵送的流量所决定的。软管的厚度，是根据它的直径和加固层数量来选取的，作用是在软管被挤压后，迅速恢复原形，从而在软管内产生较大的真空吸力。纤维加固层的结构可以使各种型号的软管泵均能产生不同的压力。                   

软管泵工作原理：
一根内壁光滑，强度可靠的特制橡胶软管安装在泵体内部，通过一对压辊沿着软管旋转挤压，这样的 旋转使得介质往一个方向输送而不会倒流，软管在输送介质之后，由被压扁软管的自身弹性和侧导轮的强制下，软管恢复原状，此时，软管内产生高真空将介质再次吸入管腔，然后介质在随之而来的压辊挤压下从软管内排出，如此周而复始，介质不断的被吸入和排出。目前产品使用温度为≤100℃。根据用户需要可以开发使用温度在120℃的软管泵软管产品。
Working principle of hose pump:
A special rubber hose with a smooth inner wall and reliable strength is installed inside the pump body. It is rotated and squeezed along the hose by a pair of pressure rollers. This rotation allows the medium to be transported in one direction without flowing back. After that, due to the elasticity of the flattened hose and the force of the side guide wheels, the hose returns to its original state. At this time, a high vacuum is generated in the hose to suck the medium into the lumen again, and then the medium is pressed by the subsequent pressure roller. It is discharged from the hose under the squeeze, and so on and on, the medium is continuously sucked in and discharged. The current product temperature is ≤100 ℃. According to user needs, we can develop hose pump hose products with a temperature of 120 ℃.