软管泵拦水带成型机工艺成熟

软管泵的润滑保养注意事项：
（1）侧导辊每隔24小时用油枪从注油咀注油（高温锂基脂GB5671—91）一次，注油时注意侧导辊的松紧情况，若发现过松，用尖咀钳将其旋紧，使侧导辊处于良好的润滑状态，如发现侧导辊有异常声音，经调整松紧，仍不能，应考虑侧导辊内铜套是否磨损，将其拆下换铜套。
（2）压辊每隔三个月拆下来保养一次，给内腔和轴承加高温锂基脂（GB5671—91）。
（3）转子轴承每隔三个月加高温锂基脂（GB5671—91）一次。
（4）新的减速机在运行一段时间后，将油箱内的机油放掉，重新加30＃机油。            

软管泵工作原理：
一根内壁光滑，强度可靠的特制橡胶软管安装在泵体内部，通过一对压辊沿着软管旋转挤压，这样的 旋转使得介质往一个方向输送而不会倒流，软管在输送介质之后，由被压扁软管的自身弹性和侧导轮的强制下，软管恢复原状，此时，软管内产生高真空将介质再次吸入管腔，然后介质在随之而来的压辊挤压下从软管内排出，如此周而复始，介质不断的被吸入和排出。目前产品使用温度为≤100℃。根据用户需要可以开发使用温度在120℃的软管泵软管产品。
Working principle of hose pump:
A special rubber hose with a smooth inner wall and reliable strength is installed inside the pump body. It is rotated and squeezed along the hose by a pair of pressure rollers. This rotation allows the medium to be transported in one direction without flowing back. After that, due to the elasticity of the flattened hose and the force of the side guide wheels, the hose returns to its original state. At this time, a high vacuum is generated in the hose to suck the medium into the lumen again, and then the medium is pressed by the subsequent pressure roller. It is discharged from the hose under the squeeze, and so on and on, the medium is continuously sucked in and discharged. The current product temperature is ≤100 ℃. According to user needs, we can develop hose pump hose products with a temperature of 120 ℃.